Motech LPS 305 Bedienungsanleitung PDF herunterladen (Seite 16)

Step 4: Measure the DC current from +out terminals (+ and COM1) with the DMM and keyin the

value (i.e. if the DMM shows 0.728A, then keyin 0.728 ) followed by the “ENTER” key. The

following message will then appear on the LCD:

Step 5: Repeat step 4. Keyin the measured value (i.e. if the DMM shows 2.491A then keyin 2.491)

followed by the “ENTER” key. The following message will then appear on the LCD:

Step 6: Measure the DC voltage from –output terminals ( - and COM1) with the DMM and keyin the

measured value (i.e. if the DMM shows 9.624V then keyin 9.624) followed by the “ENTER”

key.

The following message will then appear on the

Step 7: Repeat step 6.Keyin the measured value (i.e. if the DMM shows 30.036V, then keyin 30.036)

followed by the “ENTER” key. The following message will then appear on the LCD:

+I Hi=2.491

INDEP

ADC GET=02579

TRACK

3.3V

ADC GET=01039

INDEP

-V Lo=09.624

TRACK

3.3V

ADC GET=03099

INDEP

-V Hi=30.036

TRACK

3.3V

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Motech LPS 305 Bedienungsanleitung Seite 16